Smart System Ultrasonic Blind Cleaning Machine 6L Jewelry Cleaner
Advantage:
Ultrasonic is widely used throughout industries to remove difficult
contaminants from the parts during or after manufacturing process
which might require a stage of cleaning before the next process. In
general, if an item can be cleaned with liquid, it can be cleaned
much faster and more thoroughly with an ultrasonic cleaner.
Compared with traditional solvent/scrubbing, our ultrasonic
cleaners:
- Have a digital controller of high-precision and a long
service-life;· Are of high performance;
- Reduce chemicals in the cleaned stuffs;· Are environment friendly
because of its recyclability.
- Are more effective at removing contaminants;
- Get a good cleaning effect ;
- Save employees's labor time (and subsequent labor cost);
- Can heat the cleaning solutions to a suitable cleaning temperature
so as to enhance the cleaning efficiency;
Company Profile
Shenzhen Dekang Cleaning Electronic Appliance Co.,Limited is a
comprehensive new high-tech enterprise whichspecialized in the
research&development, productction and sale of
household,commercial,laboratorial,industrial high-power ultrasonic
cleaner ect.Especially,we also can customize non-standard products
to meet customer
Our R&D department can be divided into five sections:mechical
structure design section,electronic design section,software
developing section,graphic design section,testing section.All
menbers are excellent engeineers who have at least 5 years' R&D
experence.They are good at introducing most advanced technologies
in the world in the world into products and make some innovative
improvement.
Product details
Application
Our ultrasonic cleaner are suitable to clean irregular and complex
specialized instruments,components and PCBs of sundry
shops,workshops,factories etc.Also could cleane tooth.
Please check the pictures as below,it shows the variation after
using our cleaner.As we can see the effect is obvious.
Specification
| Model: | DK-600PS |
| Tank Size(mm): | 300*155*150 |
| Overall Size(mm): | 330*180*330 |
| Capacity: | 6L |
| Frequency(KHz): | 28/40 |
| Ultrasonic Power(W): | 0~180 |
| Heating Capacity(W): | 300 |
| Timing Range(min:secs): | 1~99 |
| Temperature Range(℃) | 0~80 |
| Water Drainage | Yes |
Instructions as below:
1. Fill the stainless steel tank with cleaning solution; Plug the
power lead into grounded outlet; After power-on, the temperature
displays the actual environmental temperature, LED displays 3
minutes (default ultrasonic time).
3.Temperature setting: Press “temperature-/temperature+”shortly at a time means time increase or reduce 1℃ at a time, press
and hold there means time will increase or decrease by 10℃ .
Usually, the best cleaning temperature is within 40℃ to 60℃.
2.Time setting: Press the “TIME-/TIME+ ”shortly at a time means time increase/reduce 1min at a time, press and hold means time will
increase/reduce by 10mins continuously. The cleaning stops when the timer counts down
to 00:00. If the unit needs to be stopped before the timer runs up, press
“Ultrasonic” button.
NOTE: Do not run the cleaner continuously for more than one hour
4. After time and heat setting, press “Heating” or “ultrasonic”
button to start both function. Press “Heating” button again, the
heating function will stop. The same for Ultrasonic Function.
6. Drain: press the “drain” button to open or close the automatic valve.
The automatic valve will close a certain time (10 minutes in
default) later after drain.
7.Empty the tank and clean both the outside and inside of the cleaner
with a clean and dry cloth for next use.
NOTE: Do not pour water out until it’s cooling, Hot water will hurt
you and damage the machine itself.
Certifications
All Dekang’s standard products have achieved most international
standards, such as CE certification, RoHS certification, FCC
certification etc. Besides, all no-standard products also can
satisfy all requirements of these most international standards.
Delivery
3 days after confirm the payment ,Express Including
YOUSU,UPS,DHL,FedEx,Air transportion,Sea transportation,Also you
could ask your courier to pick the goods.
Plug
Have a diverse plug,such as:UL,SAA,VDE,JAPAN OLUGE,SABS,THE UK
PLUGE .
FAQ
Q1.Are you a factory of trading company?
We are professional manufacturer.We are warmly welcome clients from
worldwide to visit our factory and cooperation with us.
Q2.Can I get some samples?
Yes,we are honored to offer you samples of most products.
Q3.Can we print our own brand for the fixtures ?
Of course.We are pleased to be your OEM manufacturer and meet your
OEM requirements
Q4.What’s the Payment?
T/T would be better with quick transfer and few bank fees. You can
also use Western Union and Paypal.
Q5.What certifications does the product get?
CE,RoHS,FCC&ISO9001.
Q6.Is my own forwarder available to transport the products for me?
Yes,He can pick the products from our factory if your own forwarder
is in Shenzhen. And then you won't need to pay the freight to us.
Q7,What is the guarantee period?
1 year,our engineer technology support will be always here!
